Showing posts with label Way Wicked Rods. Show all posts
Showing posts with label Way Wicked Rods. Show all posts

Saturday, October 17, 2009

Project - Ditch Stick

I built project Ditch Stick for myself because most of my float rods are between 11 feet and 13 feet long. The longer length makes these rods less desirable to fish with on smaller creeks and area's with overhanging trees and other obstacles are abundant.

The Ditch Stick was built on a 9ft 8wt. 4 piece blank. I decided to go with a beefier (8wt.) blank so that I could control the fish better in area's that have submerged timber and other obstructions. Normally a fly fisherman would opt for a 6 or 7 weight rod for Steelhead fishing. This rods has more nuts than I'll ever need on my smaller creeks. I have the power!
  • The guides that were used for this build were Fuji Alconites in standard "float rod" sizes.
  • The handle is custom made from individual cork rings (Natural burl and Burnt cork).
  • The reel seat is also made from cork - warmer in the winter months!
  • The reel seat hardware is an RA8L2 from Batson Enterprises.
I fished with this rod for the first time this past Wednesday, and I am extrememly pleased with the power of the blank and the rest of the build. It will serve me well on my smaller waters.

Here are a few pictures of my lil stick:
Project Ditch Stick 1
Project Ditch Stick 2
(The reel in these pictures is a Torrent from http://www.painefallscetnerpin.com)

Friday, August 14, 2009

New Builds on the Way ... the Way Wicked, way!

I am currently working on setting up several new builds.
I will be building an 11'6" St. Croix Wild River for a gentlemen from the Pittsburgh area. He has also shown interested in other rods as well.
I also have a 9' 0" 4wt fly rod and a 5' 6" casting rod I am doing for a friend. These will both be no frills fishing sticks. Performance before beauty!

I will also be starting on a 9' 0" 8wt conversion rod.
This rod is a 4 piece fly rod that I am going to convert to a center pin float rod. I will be building this one for myself. After all, I am my best customer!
I will be experimenting a bit with this build, and using guides that are not common for the type of fishing I plan to do with it.

I also have a rebuild on the way.
It is a St. Croix 8' 0" Avid float rod which will be fished in Ohio for Steelhead trout on smaller streams.

More info and lots of pictures coming soon!

Thursday, May 14, 2009

Supreme Xtreme

Project: Supreme Xtreme
Project "Supreme Xtreme" is my latest adventure in rod building, and it just happens to be for me!
The SX is built on a St. Croix 5C70MHF-B blank.
This blank utilizes St. Croix's state-of-the-art technology and their best materials.
As far as St. Croix blanks are concerned; This is the best they offer... period!
The build is somewhat experimental for me. As someone who enjoys learning and expanding my capabilities; I found some information on a rod building forum about something call Micro Guides.
I sat at my computer for the better part of three days reading and learning about the theory behind the guides, and why some builders thought they were awesome; and others thought they were a fad. In addition to using micro guides I also tied up my first "Simple Spiral" wrap.
Spiral Wrap:
With a traditional casting rod setup the guides are placed on top of the blank, and this can lead to a few problems:
  • Line contacting the blank
  • Torque created by the forces applied to the guide when under load
  • Excess weight from the use of double-footed guides
The spiral wrap eliminates these problems - completely!
By rotating, or wrapping the guides around the blank so that they end up on the bottom of the rod; like a spinning rod, line contact issues and torque are removed from the equation.
Micro Guides:
Micro guides are nothing more than extremely small, single-foot fly guides.
The theory is, because of their size and ridiculously light weight; more guides can be added and still weigh less than traditional guides - and/or - excess weight can be reduced by using fewer, smaller (micro) guides.
Traditionally a casting rod is tied with all double foot guides; with the exception of some newer rods that employ Fuji's Concept Guide System.
All of the guides on the Supreme Xtreme are single-foot with the largest guide on the rod being a size 6.
The running guides, or guides just below the tiptop, are a size 4.
To give you some idea how small these are; the inner diameter is .077 inches.
That is just over 1/16th of an inch!
The entire set of guides for this rod including the tiptop weighed 1.1 grams!
Do the Micro Guides create line friction and reduce casting
distance?
I have not spent a lot of time fishing with this rod yet, as I just finished it
a few days ago... but from experience casting with it: NO
I was able to cast a 3/8oz sinker more than 60 feet with the flick of my wrist.
This was done with 50# PowerPro braided line.
If those puny little micro guides are able to cast 50# braid like that... I can't wait to hit the water with 12# Flouro!
Here are a few pictures of the Supreme Xtreme that I took during the build process.
More pictures to follow - I'm headed to Enid, Oklahoma to test it out this Friday
*Update*
My first impression of the micro guides and the spiral wrapped happened before the rod was finished; I was testing guide placement and took it out for a cast or two.
This past week I took the rod to Enid, Oklahoma and tried it out for several hours while casting and flipping various lures with it. To say the least I was extremely impressed.The small diameter of the micro guides did not seem to interfere with casting distance or accuracy whatsoever.
I was using a Pfleuger President with 50# PowerPro and was able to cast a 5/8oz Trap upwards of 100 feet with little effort. Flipping accuracy didn't seem to be affected either. I was dropping 1/2oz footballs in a coffee cup sized target from 15-20 feet away with ease.
The spiral wrap accomplished exactly what it was intended for. The line does not contact the blank; I used fewer guides to reduce weight, and the static guide test was nearly perfect.This certainly will not be my last rod built with micro guides and a spiral wrap.
I would recommend them to anyone who uses a casting rod for Bass fishing. I will surely be recommending them to my customers in the future!


Tuesday, April 21, 2009

The Hammer - Completed!

I am happy to say that The Hammer has been completed and shipped. I certainly hope that the new owner receives it safe and sound, and that he is happy with it.

The build went as expected, with one small hitch. I had an issue with one of the guides used on the rod and had to order a replacement. This added almost a week.

Here is a short slideshow that I put together with the photo's I was able to take: